What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 25.06.2025 04:53
This is 'the assistant's answer'
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–10[John johnson John Johnson ]
Homophobia is clearly a harmful mental sickness. What can LGBT people do to cure it?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
He then describes the function of a fuse.
‘Hamilton’ Original Cast Reunites for Tony Awards Medley — Watch - The Hollywood Reporter
At one ohm, the resistor has a maximum of 1 watt power.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
the problem then depends on "how fast does the fuse operate?".
The MOV will conduct when the voltage exceeds 50% of line voltage.
He then asserts :
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Does having the wrong address on my car insurance invalidate my policy?
The other is “what does a “fuse” do?”
This one hit behind the barn.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Utah now one of 36 states that have seen measles cases this year - Deseret News
but this device (an Inductor) … impedes the rapid changes in the current.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Edit 2024–10.
eight
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Mauricio Pochettino on Absent Christian Pulisic: 'Players Cannot Dictate the Plan' - FOX Sports
2024–10–16 [ OO OLAOYE OYEBODE ]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
For this case there are devices called Metal oxide varistors (MOV).
'City-Killer' Asteroid Even More Likely to Hit The Moon in 2032 - ScienceAlert
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
a photo is worth a thousand words.
Because the load is inductive, the current lags the voltage.(by a bit).
Cosmic Dawn with Nobel Laureate John Mather - NASA (.gov)
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
But it can get overloaded, and no longer works.
Aaron Rodgers says decision to sign with Steelers 'was best for my soul' - NFL.com
There are three different concepts here that are getting confused.
But… the neutral is now “floating” because of the 1 ohm resistance.
but I think this circuit , shows a few more pieces.
James Cook faces the heat from Bills beat reporters - Buffalo Rumblings
so, what happens?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
[old diagram got deleted by accident]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Pokémon Cafe’s new Mega Charizard curry plate is a work of art in more ways than one - SoraNews24
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
These devices are installed between the “hot” and “neutral” and protective ground.
I post the exact comment here.
One
What is lightning?
Now when you have a certain ac resistance, then a current flows in a loop.
These are simplified answers to the original question, and does not change anything I wrote above.
One is “what exactly is in a ‘surge protector’ ? ”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is the picture of an electronic coil of wire wound around a core of magnetic material.
[image of Common-mode choke]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
It also is a device that limits the change in current flow.
Here is a simplified AC power diagram.
In schematic diagrams this is the symbol for a fuse:
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At least they know the answer if they wanted it.
A circuit breaker is similar, but is resettable.
nine
Barnstars:
Upvotes:
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
what exactly is a ‘surge’ protector?
The bolt then partially travels down the line to your home.
An AC voltage/ current source, and an ac inductive load.
This device then solves the entire problem.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
(Dc diagram shown, AC is similar).
It seems Mohan does not understand the difference between a comment and an Answer.
There are two important concepts here.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What does a fuse do?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
The third is lightning and “how it gets conducted into a home.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
He then describes Rainy Season and Lightning.
A fuse is a non-resetable over current circuit protector.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This is where the MOV conducts again, and dissipated the energy.
So, the voltage could go up to 500 volts, and the fuse will not open up.
First Sentence: